Blogs

This was my first visit to Catton Hall Classic Car show, Catton Hall in Derbyshire just below Burton upon Trent was a great setting and saw a really good turnout of all kinds of classics, including plenty of Fords!

Now where did I put that!, was sure I had a spare throttle clip somewhere! Drop me a mail if you see any clips you need! More clips, brackets and pins

Dave’s Shell is back from having the cage fitted, and its a lovely job!!

Added a few more bits to the shop

At last a break from the welding! With nearly Three Quarters of the shell welding done its time to get the cage fitted. If all goes to plan the cage should be finished in a few weeks, then almost, almost ready for paint!

Half way through scanning in old photos and came across these, RS Meetings from 1989

Starting work on the clocks for the Mk2 Mex Found some new circuits on Facebook so thought I would give them a try!! They turned up yesterday and look good! will compare them to the original and update this post!

Now Dave’s Gp4 project is under way the standard road car bits we don’t need are available, loads of photos over on the Shop page!

After a lot of thinking about the options for Dave’s Mk2, a plan was concocted…. So with a deep breath it all started again!

Some more spares have landed….. Spotted a mint set of seatbelts and wiper motors in the photos for this abandoned Dutton project needed for Paul’s Mk2 Mex and could not resist the boxes of spares, bolts and bits & bobs!!