Our Cars

Is there anything worse than hours stuck in a shell seam welding…… Err yes prepping ready for paint!! The only good bit is deciding what colour! Decisions, Decisions. All the welding now complete, next job paint then on to the best bit of bolting bits back on!

Dave’s Shell is back from having the cage fitted, and its a lovely job!!

At last a break from the welding! With nearly Three Quarters of the shell welding done its time to get the cage fitted. If all goes to plan the cage should be finished in a few weeks, then almost, almost ready for paint!

Starting work on the clocks for the Mk2 Mex Found some new circuits on Facebook so thought I would give them a try!! They turned up yesterday and look good! will compare them to the original and update this post!

After a lot of thinking about the options for Dave’s Mk2, a plan was concocted…. So with a deep breath it all started again!

With the years rain all in one night It all went a bit wrong on the Manx for Dave on SS4. Fighting with the conditions the car snapped out on a slippy section and bounced off the nearest trees before barrelling down the road for 100 meters. Both Dave and …

Update on Paul’s Mk2 Mexico build

Ju’s Mk1 is finally back from paint so we just had to squeeze in a visit to see Martin at the Escort Agency for an update!

Hopwood Dave – Winstanley Richard Weston Park, Shropshire An historic only event this year set in the estate of Weston Park providing 30 stage miles of smooth asphalt roads.

I need some RS alloy parts and running gear bits I said.. I know where there is a scrap RS2000 he said………… Hence the new Addition we just could not pass up!!