Mk2 Escort

Standard Mk1 & Mk2 Escort Halfshafts 22t (spline) – 26in long RS Mk1 & Mk2 Escort Halfshafts 22t (spline) – 26in long. Same as the standard ones but with the center cap extruding further to accommodate RS alloys

How hard can it be to work out which door rods go where!!………….2 days later and still scratching my head! So I thought I would take some photos There are a couple of different latches depending on the type of locks, The Van/Estate and 4Door rear does not have the …

Tony from Auto Electrics on Wheels on FaceBook is remaking various old Ford’s flexi PCB’s for the back of your old clocks. I bought some for my RS2000, not tried yet but look good!  

Lee Osborne on FaceBook is making replacement seat pans for Recaro seats. They are direct replacements for your old worn and torn ones including the webbing type seats tool tops and fishnets Contact Lee on the link above for more details  

One of the Gp1 accessories was a larger cast exhaust manifold The Gp1 manifold is the one on top in the photo above Close up photos Fitted to Engine  

There are two types of Mk2 Ignition barrel The early 75AB – 3675 – A1B body And the later 77AB – 3675 – AA First up the early 75AB – 3675 – A1B To release the spring a hole has to be drilled through the body. To mark this up place …

Mk1 Lotus Cortina 13 x 5.5J – (All Early Ford were 4 x 108pcd) – Marked LP881 or 881.A  – One rivet Dunlop made wheels for many Early Fords their 5.5j one rivet steel rims were made from a thinner gauge steel and had a different rim contour from the later …